Steren CCTV-971 Manual De Instrucciones página 82

PTZ Config
PT or PTZ camera settings
Take into consideration that the
configurations of the channels
listed below, must be equal to the
values of the PTZ camera.
1. Select the channel of the DVR where to connect the PT or PTZ camera.
2. Select the Protocol of the DVR in accordance with your camera. Important: this value
should be the same as the camera.
3. Select the address that the PT or PTZ camera has established.
4. According to your needs, select the same baud rate both for the camera and DVR.
5. According to their needs and in accordance with the settings of your camera, set the bit
data (8, 5, 6, or 7-bit), detention 1 or 2 bit rate (Stop Bits), and parity.
6. To connect another camera, simply select an address and different channel.
35 35