Pro-Fix System; Fitting And Removing The Seat - JANE KENDO Manual De Instrucciones

F. PRO-FIX SYSTEM
The chassis of your pushchair includes the PRO-FIX system, ready for
you to attach the JANÉ accessories available on the market (KOOS,
MICRO, MATRIX or NEST), fitted with the PRO-FIX connectors suitable
for the KENDO model.
The PRO-FIX system makes it easy to attach and remove these acces-
sories to and from the chassis, with a quick, simple and safe operation,
that anchors them securely to the chassis. To do this follow the ins-
tructions for each accessory carefully.
WARNING: Before using this product, always make sure that the
!
locking devices of the accessories are correctly engaged by
pulling the accessory upwards
G. FITTING AND REMOVING THE SEAT
With the PRO-FIX system the seat can be fitted facing you (rear facing
position) a when the child is very small or facing outwards (forward
9
facing position) as the child grows.
To do this, connect the seat from above and fit it onto the PRO-FIX
connectors on the chassis, until you hear it CLICK into place.
b
9
c
9
WARNING: Put the parking brake on when fitting or removing
!
the seat.
WARNING: Make sure that the seat is securely anchored to the
!
chassis by gently pulling it upwards.
WARNING: Never take the seat off the KENDO chassis while the
!
child is still sitting in it.
To take the seat off the chassis, simultaneously press the unlocking
levers found on both sides of the seat and pull it
WARNING: Use the seat belts whenever the child is sitting or
!
lying in the seat.
upwards.10
27
EN