Pro-Fix System; Fitting And Removing The Seat - JANE CROSSLIGHT Instrucciones

F. PRO-FIX SYSTEM
The chassis of your pushchair includes the PRO-FIX system, ready for
you to attach the JANÉ accessories available on the market (KOOS,
MICRO, MATRIX or NEST), fitted with the PRO-FIX connectors suitable
for the CROSSLIGHT model.
The PRO-FIX system makes it easy to attach and remove these acces-
sories to and from the chassis, with a quick, simple and safe operation,
that anchors them securely to the chassis. To do this follow the ins-
tructions for each accessory carefully.
WARNING: Before using this product, always make sure that the
!
locking devices of the accessories are correctly engaged by
pulling the accessory upwards
G. FITTING AND REMOVING THE SEAT
With the PRO-FIX system the seat can be fitted facing you (rear facing
position) 9 a when the child is very small or facing outwards (forward
facing position) as the child grows.
To do this, connect the seat from above and fit it onto the PRO-FIX
connectors on the chassis, until you hear it CLICK into place.
9
b
9 c
WARNING: Put the parking brake on when fitting or removing
!
the seat.
WARNING: Make sure that the seat is securely anchored to the
!
chassis by gently pulling it upwards.
WARNING: Never take the seat off the CROSSLIGHT chassis while
!
the child is still sitting in it.
To take the seat off the chassis, simultaneously press the unlocking
levers found on both sides of the seat and pull it upwards.
! WARNING: Use the seat belts whenever the child is sitting or
lying in the seat.
10
EN 17