Beko HNU51311SH Manual Del Usuario página 15

Ocultar thumbs Ver también para HNU51311SH:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 169
4
Cleaning and Maintenance
C
Absorbed air is cleaned by oil fil-
ters and an active carbon filter and
retransferred to the kitchen. Pic. 4
NOTE!
The waste air should not be trans-
C
ferred to a smoke or waste gas
flue, nor to a flue used for venti-
lation of the places where heating
sources are installed.
To seal the materials causing odo-
ur in the circulating air mode, you
should install an active carbon fil-
ter. Consult your authorised dealer
C
to learn different opportunities
for operating the appliance in the
circulating air mode. You can buy
accessories necessary for this
procedure from relevant points of
sale, authorised service agents or
online sales centre.
The appliance you have purchased is suitable for
use with carbon filter. To attach the carbon filter;
1- Place the carbon filter into its housing. Pic. 15/1
2- Turn the carbon filter clockwise to make sure
that it is tightly inserted. Pic. 15/2
Res.13
Res.14
C
If the carbon filter is not properly at-
tached, it can fall and damage your
product.
CAUTION
A
Never wash the carbon filters.
Keep the carbon filters away from
children.
Hood / User Manual
A
• The surface may be damaged due to abrasive
or rubbing cleaning agents. Never use abrasive
and rubbing cleaning agents. Acquire the clea-
ning agents and protective materials suitable
for your appliance form your authorised service.
The surface of the appliance and the controllers
are sensitive to scratching.
• Clean the surfaces with a soft and damp cloth,
dishwashing liquid or a soft glass cleaning
agent. Soften the dried and adhered dirt with a
damp cloth. Do not scratch out!
• Dry cloths, sponges that may scratch, materials
that require rubbing, sand and the other effec-
tive cleaning agents containing mineral water,
acid or chloride are not suitable.
• Clean the stainless steel surfaces only in the di-
rection of grinding.
• Do not use stainless steel cleaning agent or wet
cloths for control units. Cleaning the metal oil fil-
ters Used metallic oil filters hold the humidity
generated in the kitchen and the oily particles
contained within the steam. In case of regular
use (1 to 2 hours per day), clean the metal oil fil-
ters about once every 3 months.
• Do not use over-effective, acidified or corrosive
cleaning agents.
• For the cleaning of the metal oil filters, use a
damp cloth to clean holding parts of metal oil
filters inside the appliance.
• You can clean the metal oil filters in the dish-
washer or by hand.
Res.15
• Do not apply spray cleaning agents directly on
the appliance.
• Do not put flammable and/or heavy decorative
items on the appliance.
4.1 Washing in the Dishwasher
• In case of washing in the dishwasher, slight dis-
coloration may occur. This does not affect the
function of the metal oil filter.
• Do not wash heavily soiled metal oil filters to-
gether with the dishes.
CAUTION
Cleaning and user maintenance
should not be performed by child-
ren without supervision.
15 / EN
Tabla de contenido
loading

Este manual también es adecuado para:

Hnu51311sHnu71410sHnu71311sHnu51312s

Tabla de contenido