Use Of The Appliance - Beko HNU51311SH Manual Del Usuario

3 Installation and Use of the Appliance
fied in the technical drawing (Pic. 7).
Pic. 8
1. 3.5 x 9.5 Screw
2. Ø 120 mm Plastic Flue
3. BodyValve Pin Socket
• Attach the plastic flue contained in the package
to the body of the appliance using 2 screws 3.5
x 9.5. (Pic. 8) Do not rub it against the surface.
Pic. 8
Pic. 9
1. Air discharge pipe
2. Air exhaust flue of the hood
• Attach the air discharge pipe to the air exhaust
flue and fasten via clamp (Pic. 9).
12 / EN
A
1
2
3
1
2
Pic. 10
1. Kitchen cabinet bottom view
2. 4 X 3,9 X 32 hood installation screw
• Place the hood into the kitchen cabinet and
attach the hood to 4 installation holes drilled
before (Pic. 10).

3.5 Use of the Appliance

3.5.1 Use of the Rocker Switch
• Bring the lamp switch to position '0' to turn off
the lamp.
• Bring the lamp switch to position '1' to turn on
the lamp.
• Bring the motor switch to position '0' to turn off
the motor.
• You can operate the motor in the 1st speed level
minimum and in the 3rd speed level maximum
according to the density of cooking steam.
CAUTION
As the bends and elbows in the
aluminum pipe will cause decrea-
se in the air suction power, using
these must be avoided as much as
possible.
1 2 3
Hood / User Manual