Game ready GRPro 550550-03-RN Manual De Instrucciones página 40

The surface of the Connector Hose can be cleaned using a soft cloth and one of the
following:
Mild detergent
•
Steri-Fab
®
•
70% Isopropyl alcohol
•
We do not recommend the use of quaternary ammonium (such as Virex
•
do Not uSe:
Phenolic-based disinfectants (such as Amphyl
•
setting).
Any solvent based cleaners. Doing so will damage the plastics and will void your
•
warranty.
Abrasive materials. Doing so will damage the plastics and will void your warranty.
•
Any petroleum based lubricants. Doing so will damage the o-rings and will void your
•
warranty. If lubrication is required, the use of silicon spray is recommended.
Gently remove Heat Exchanger from the Sleeve. Hand wash the Sleeve in cold water, using
a mild detergent or antibacterial soap. Do not use fabric softener. Hang to dry.
If needed, the external surface of the Heat Exchanger may be cleaned by wiping down with
commercial non-bleach cleaning wipes or hand washed using a very small amount of mild
detergent or antibacterial soap. DO NOT MACHINE WASH.
Refer to the Wrap Use Guide accompanying individual Wraps for more information.
The Carry Bag should be cleaned using a soft cloth or brush and a mild detergent. Febreze
or the equivalent can be used on the Bag if desired. If the Carry Bag has a biological material
on the surface, Steri-Fab
Be sure to test any product on a small portion of the Bag to ensure that it will not cause
damage.
Note: To operate the GRPro 2.1 System, you do not need to remove it from the Carry Bag.
Simply unzip the Bag's main compartment and end panel. Fill the reservoir with ice and
water. Attach the Connector Hose and the AC Adapter to the end panel of the Control Unit
and plug the AC Adapter into a grounded electrical outlet.
coNNectoR hoSe
WRAPS
cARRY BAG
may be used to decontaminate those surfaces.
®
– typically only found in a clinical use
®
) or Cavicide.
® ®
®
EN-11