Pre-Alarm; Information Screen - Tripp-Lite SmartOnline SVX Serie El Manual Del Propietario

9. Control Panel
Nominal Battery Voltage
Battery Capacity in Ah
Maximum Charging Current
Battery Low Voltage
Battery Low Capacity
Battery Shutdown Voltage
Periodic Battery Test
Battery Test Interval
Stop by Time
Stop by Battery Voltage
Stop by Battery Capacity
Battery Age Alert
Temperature Compensation

9.3.6.4 Pre-Alarm

The SETUP – PRE-ALARM screen may be accessed in any UPS operating mode. All settings may be made in any operating mode.
PRE-ALARM

9.3.7 Information Screen

Use Down/Right key to select "INFORMATION" option. Press "Enter" key to enter Information sub-menu.
The Information screens offer an overview of all the programmed UPS system states. A summary is provided below.
Identification
Data
Model Name
Serial Number
Display#ID Firmware Version
STS# xx Firmware Version
Module#ID DSP Firmware Version
Module#ID MCU Firmware Version
Module#ID Serial Number
Module#ID DSP Firmware Version
Module#ID MCU Firmware Version
Module#ID Serial Number
16-11-183-9334F8.indb 26
SmartOnline SVX-Series UPS Operating Mode
Standby Bypass
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Set line voltage range. Upper limit: +5/10/15/20%; lower limit: -5/10/15/20%
Line Voltage Range
(Default: +15%/-20%)
Set line frequency range. Upper limit: +1/2/3/4Hz; lower limit: -1/2/3/4Hz
Line Frequency Range
(Default: +/-4Hz)
OVERLOAD: Set UPS overload (40-100%) (Default: 100%)
Load
LOAD UNBALANCE: Set output load unbalance (20-100%)
HOME MENU
Line Battery Battery Test
Y
Y
Y
Y
Y Y Y
Y Y Y
Y Y
Y Y
Y Y
Y Y Y
Y Y Y
Table 9.5
INFORMATION
User Adjustable / Section Reference
No
No
No
No
No
No
No
No
No
No
26
Fault Converter ECO
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Identification
System
Battery
1/18/2017 9:53:25 AM
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y