Ryobi OGS1820 Manual Del Usuario página 17

GB
F D E
OPERATION
INSTALLING THE BATTERY PACK (NOT INCLUDED)
Place the battery pack in the grass shear / shrubber.
■
Align raised rib on battery pack with groove in grass
shear / shrubber. See Figure 2.
Make sure the latches on the battery pack snap in place
■
and that battery pack is secured in grass shear / shrubber
before beginning operation.
REMOVING THE BATTERY PACK (NOT INCLUDED)
Locate latches of battery pack and depress to release
■
the battery pack from the grass shear / shrubber. See
Figure 2.
Remove battery pack from the grass shear / shrubber.
■
CAUTION
When placing battery pack in your grass shear
/ shrubber, be sure raised rib on battery pack
aligns with groove in grass shear / shrubber
and latches snap in place properly. Improper
assembly of battery pack can cause damage to
internal components.
STARTING THE GRASS SHEAR / SHRUBBER
Remove the blade cover.
■
Press and hold the trigger lock button. See Fig. 3 .
■
Release the trigger lock button and continue to squeeze
■
the trigger for extended operation.
STOPPING THE GRASS SHEAR / SHRUBBER
Release the trigger to stop the grass shear / shrubber.
■
Upon release of the trigger, the trigger lock button will
■
be automatically reset to the lock position.
OPERATING TIPS
Before starting your grass shear / shrubber, hold the unit
■
with the cutting blades directed away from you. Always
use the unit properly.
Keep from trimming too close to dirt, sand or gravel.
■
This can cause the blades to dull, reducing the cutting
effi ciency.
Do not force the unit through dense growth. If the blades
■
slow down, reduce your pace.
If blades do become jammed, stop the motor, allow
the blades to stop and remove the battery pack before
attempting to remove the obstruction.
HOLDING THE GRASS SHEAR / SHRUBBER
WARNING
Dress properly to reduce the risk of injury when
I P NL S DK N FIN GR HU CZ RU
English
Hold the unit by the rear handle with the blade directed
■
away from you. See Figure 4.
USING THE GRASS SHEAR
Use the grass shear for decorative trimming of grass
■
around trees, walkways, fl ower beds, etc.
With the blade parallel to the ground, start unit and trim
grass in a forward motion. See Figure 4.
12
RO PL SLO HR TR EST LT
operating this unit. Do not wear loose clothing
or jewelry. Always wear eye protection when in
use. Wear heavy, long pants, boots and well
fitting gloves. Do not wear short pants, sandals
or go barefoot.
DANGER
If blade jams on any electrical cord or line, DO
NOT TOUCH THE BLADE! IT CAN BECOME
ELECTRICALLY LIVE AND VERY DANGEROUS.
Continue to hold the grass shear / shrubber
by the insulated rear handle or lay it down and
away from you in a safe manner. Disconnect
the electrical service to the damaged line or
cord before attempting to free the blade from
the line or cord. Failure to heed this warning
will result in serious personal injury or possible
death.
WARNING
Clear the area to be cut before each use. Re-
move all objects such as cords, lights, wire,
or string which can become entangled in the
cutting blade and create a risk of serious
personal injury.
WARNING
Avoid using solvents when cleaning plastic
parts.
Most plastics are susceptible to damage from
various Types of commercial solvents and may
be damaged by their use. Use a clean cloth to
remove dirt, oil, grease, etc. When servicing
use only identical Ryobi replacement parts.
Use of any other parts can create a hazard or
cause product damage.
CAUTION
Do not at any time let brake fluids, gasoline,
petroleum based products, penetrating oils,
etc., come in contact with plastic parts. They
contain chemicals that may damage, weaken,
or destroy plastics.
LV SK BG