Tabla de contenido
Idiomas disponibles
Idiomas disponibles
489469-00 BDL500 laser
For example:
• Measure wall, from right to left. (ex. 8 ft.)
• Press accu-space button 3 times for 3 pictures or 9 times for 9 items.
• Roll unit back toward start point (in this case left to right). It will indicate targets at 2, 4,
and 6 ft.
• When the unit is within about 1 inch of each point it will beep faster and display 2 arrows
on the LCD screen.
• When the unit is within about 1/16 inch of each point it will sound a constant tone and
display 4 arrows on the LCD screen.
• When the accu-spacing button is pressed, the unit will automatically measure to the
center of the unit.The reference point can be changed by pressing left (C1), center (C2)
or right (C3).
REPEAT DISTANCE:
• Take a measurement (set start reference, press clear, roll the unit, set end
reference)
• Press the repeat measurement button (F).
• Roll the unit.
Similar to the accu - spacing function, the LCD screen will display an on-going
measurement, starting from 0, and it will beep and display arrows every time it reaches a
multiple of the initial measurement.
For example:
• Take a measurement (e.g. 16")
• Press the repeat measurement button.
• Roll the unit. It will beep and display arrows every time it reaches a multiple of 16 ".
TO ADD MEASUREMENTS:
• Take a measurement (set start reference, press clear, roll the unit, set end
reference)
• Press the plus button.
• Take another measurement (set start reference, press clear, roll the unit, set end
reference)
• Press the equals button to get addition result.
When the plus button is pressed, the "+" symbol is displayed on the LCD
screen. The first measurement will continue to be displayed until the unit starts
rolling. When the unit starts rolling the reading is automatically reset to start at
zero.
• After the equal button is pressed, the result will continue to be displayed until
the clear button is depressed.
TO MULTIPLY:
• Take a measurement (set start reference, press clear, roll the unit, set end reference)
• Press the times button.
• Take another measurement (set start reference, press clear, roll the unit, set end
reference)
• Press the equals button to get area result.
• Or, press the times button again
• Take another measurement (set start reference, press clear, roll the unit, set end
reference)
• Press the equals button to get volume result.
When the times button is pressed, the "x" symbol is displayed on the LCD screen. The
number on the screen will continue to be displayed until the unit starts rolling. When the
unit starts rolling the reading is automatically reset to start at zero.
After the equals button is pressed, the result will continue to be displayed until clear
button is pressed.
A maximum of 3 numbers can be multiplied (to get volume).
EXIT FUNCTION
• Press the clear button and hold it for 3 seconds to exit from the accu - spacing function,
repeat distance function, addition, or multiplication.
This will clear the measurement display and return the unit to regular measurement
function.
8/18/05
10:50 AM
Page 5
5
Tabla de contenido
