Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TOOLS YOU WILL NEED
#1 and #2 Phillips
screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles
MOUNTING SPACE
16-
1 2
from the floor
to the top of
the oven
6
Installation Instructions
Pencil
Scissors (to cut
template, if necessary)
Saw (saber, hole or keyhole)
Level
Bottom edge of
cabinet needs
more from the
cooking surface
min.
2
Backsplash
Ruler or tape measure and
straight edge
Electric drill with
3 16
7 16
1 2
5 8
Stud finder
Hammer (optional)
NOTES:
•
free of obstructions.
• This oven is for installation over ranges up to
• If the space between the cabinets is greater than 30", a
Filler Panel Kit may be used to fill in the gap between the
microwave oven and the cabinets. Your Owner's Manual
contains the kit number for your model.
• If you are going to vent your oven to the outside, see
Hood Exhaust Section for exhaust duct preparation.
• When installing the oven beneath smooth, flat cabinets,
be careful to follow the instructions on the top cabinet
template for power cord clearance.
• * 13" max: for standard installation, 15" cabinet depth
requires additional steps using an additional installation
kit JX15BUMPWW/BB.
• For models with top venting holes: Do not allow cabinetry
or other objects to block the airflow of the vent.
• Haier microwaves should not be installed over any cooktop
or range with a combined BTU greater than 60,000 BTU.
Carpenter square
(optional)
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
Duct and masking
tape
31-7000110 Rev. 1
Tabla de contenido
