Mounting The Bike Handle - Stihl FS 300 Manual De Instrucciones

Ocultar thumbs Ver también para FS 300:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

English / USA

Mounting the Bike Handle

3
1
:
Hold the lower clamp (1) steady.
:
Unscrew and remove the clamp
screw (2).
:
Remove the upper clamp (3) from
the lower clamp.
Upper and lower clamps are loose
once the clamp screw has been
removed.
20
2
:
Place the handlebar (4) in the lower
clamp (1) so that distance A is no
more than 15 cm (6 in).
:
Place upper clamp in position and
press it down.
:
Fit the clamp screw.
:
Line up handlebar at right angles to
the drive tube.
:
Tighten down the clamp screw.
A
4
1
8
7
5
6
:
Loosen the screw (5), the nut (6)
remains in the control handle (7).
:
Push the control handle – throttle
trigger (8) facing the gearhead –
onto the handlebar (4) so that the
holes (9) line up.
:
Insert screw and tighten it down
firmly.
:
Go to "Adjusting the Throttle Cable
To save space when transporting or
storing the machine, loosen the
clamp screw and swing the
handlebar in line with the shaft, fold
the handles down.
FS 300, FS 350, FS 400, FS 450, FS 480
7
9
4
9

Hide quick links:

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Fs 350Fs 400Fs 450Fs 480

Tabla de contenido