Mounting The Deflectors And Limit Stop - Stihl FS 300 Manual De Instrucciones

English / USA
Mounting the Deflectors
and Limit Stop
1
3
Deflectors
1 = Deflector for mowing tools
2 = Deflector for mowing heads
Mounting the Deflector
: Place the deflector in position.
: Fit the plate (3).
: Insert the screws and tighten them
down firmly.
22
2
3
Limit Stop
4 = Limit stop for circular saw blades.
Mounting the Limit Stop
: Place the stop in position.
: Insert the screws and tighten them
down firmly.
4
8
6
If you use one of the mowing heads,
note that the skirt (5) must be fitted onto
the deflector (1):
All nylon line mowing heads:
: Use the lower guide slot (6) and, in
addition, push the blade (7) into the
upper guide slot on the skirt – line it
up with the first hole.
: Insert the screw and tighten it down
firmly.
PolyCut 40-3 mowing head:
: Slide the skirt (8) into the upper
guide slot.
FS 300, FS 350, FS 400, FS 450, FS 480
5
1
7