Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons only the cutting
attachments and deflectors or limit stops
shown in each row of the table may be
used together. No other combinations
are permitted because of the risk of
accidents.
Cutting Attachments
Mowing heads
1
STIHL TrimCut 41-2
2
STIHL PolyCut 41-3
Metal cutting attachments
3
Brush knife 305-2 Spezial
(305 mm dia.)
4
Brush knife 300-3
(300 mm dia.)
5
Shredder blade 270-2
(270 mm dia.)
6
Scratcher tooth circular saw blade
200
(200 mm dia.)
7
Chisel tooth circular saw blade 200-
22 (4119), chisel tooth circular saw
blade 200-22 HP (4000)
8
Chisel tooth circular saw blade 225
(225 mm dia.)
FS 300, FS 350, FS 380
WARNING
Non-metal brush knives, shredder
blades and circular saw blades are not
approved.
Deflectors, Limit Stops
Deflectors
9
Deflector only for mowing heads
10 Deflector with
11 skirt and blade only for mowing
heads
12 Deflector without skirt and blade, for
metal mowing attachments 3 to 4
13 Deflector for shredder blade
Limit stops
14 Limit stop for 200 mm circular saw
blades
15 Limit stop for 225 mm circular saw
blades
Harness
16 Shoulder strap must be used
17 Full harness may be used
18 Full harness must be used
Mounting the Bike Handle
3
1
Hold the lower clamp (1) steady.
N
Unscrew and remove the clamping
N
screw (2). The clamps are loose
once the clamping screw has been
removed.
Remove the upper clamp (3) from
N
the lower clamp.
English
2
59