Forch 5350 9021 Manual De Instrucciones página 21

Pneumatic Bit Ratchet Driver
ENG
1. General information
- Please ensure that the user has read thoroughly and understood the provided operating
instructions before using the tool for the first time.
- The operating instructions contain important information which is required for the safe and
smooth operation of the tool. - Please adhere to all safety instructions and information in these
operating instructions to ensure the intended use of the tool.
- Therefore, we recommend to always keep the operating instructions close to your tool.
- This tool was designed for certain applications. We expressly point out that this tool may not
be altered and/or used in a way which does not comply with its intended use.
- FÖRCH does not accept liability or guarantee for injuries or damages which result from the
improper use or if used for purposes other than the intended use or violation of the safety
instructions.
- Furthermore, it is imperative to adhere to the accident prevention guidelines and general safety
instructions applicable for the area of use for this tool.
2. Symbol explanation
Attention: Please pay particular attention to the symbols!
Read operating instructions!
The operator is obliged to adhere to the operating instructions and the user has to be instructed
how to use the tool according to the operating instructions.
INFORMATION!
This symbol identifies information which makes using the tool easier.
WARNING!
This symbol identifies important descriptions, dangerous conditions, and threat to safety or
safety instructions.
ATTENTION!
This symbol identifies information which, if not adhered to, may lead to damage, faults and/or
device failure.
3. Liability and guarantee
- Any use which goes beyond the intended use and/or any different use of the tool, is not
allowed and is considered as an improper use of the tool.
- Demands of any kind against the manufacturer and/or representatives resulting from damages
due to improper use of tool are explicitly excluded.
- The operator is liable for damages resulting from improper use.
Always wear personal protective equipment.
4. Replacement parts
- Only use original replacement parts by the manufacturer.
- Wrong or faulty replacement parts can lead to damage, faults or total failure of the tool.
- If unapproved replacement parts are used then all guarantees, service, compensation and
liability against the manufacturer or his representatives, resellers and delegates expire
immediately.
5. Disposal
- Clean before disposal and dismantle in accordance with applicable work and environmental
guidelines. Recycle components.
- Metal parts can be scrapped.
This section gives an overview about all important safety aspects to ensure optimal protection
for your staff as well as the secure and error-free operation of the equipment. Furthermore, the
individual chapters also have concise safety instructions with symbols to prevent immediate danger.
For your safety