Accessing The Camera Using The Web Browser - Sony SNC-RZ30N Manual De Instalación

6
Click on the camera you want to
assign a new IP address in the
list.
The network settings for the selected
camera are displayed.
7
Set the IP address.
To obtain the IP address
automatically from a DHCP
server:
Select Obtain an IP address
automatically.
The IP address, Subnet mask and
Default gateway are assigned
automatically.
To specify the IP address
manually:
Select Use the following IP address,
and type the IP address, Subnet mask
and Default gateway in each box.
8
Set the primary DNS Server
address and, if necessary,
secondary DNS server address.
To obtain the DNS server
addresses automatically:
Select Obtain DNS server
automatically.
To specify the DNS server
addresses manually:
Select Use the following DNS server,
and type the primary DNS server
address and Secondary DNS address in
each box.
Note
The Third DNS Server address and
Fourth DNS Server address are invalid
for this camera.
9
Type the Administrator name
and Administrator password.
The default settings of both items are
"admin."
10
Confirm that all items are
correctly set, then click Apply.
If "Setting OK" is displayed, the IP
address is correctly assigned.
14
GB
Assigning the IP Address to the Camera
Accessing the Camera Using
the Web Browser
When the IP address has been assigned to
the camera, check that you can actually
access the camera using the Web browser
installed in your computer.
This section explains how to access the
camera using the Internet Explorer.
For details on the operations using the Web
browser, i.e. for using a Web browser that is
not the Internet Explorer, see the User's
Guide stored in the supplied CD-ROM.
1
Start the Web browser on the
computer and type the IP
address of the camera in the
URL box.
The Welcome page of Network
Camera SNC-RZ30 is displayed.
2
Click ActiveX viewer.
The Main Viewer page is displayed and
the monitor image from the camera
appears on the screen.