Flow Chart - Abicor Binzel BRS-LCi VW Instructivo De Servicio

6 Putting into operation

6.8 Flow chart

Fig. 10
NOTE
• The injection results depend on the waiting times for air-cleaning and the working pressure.
• If the working pressure is too low, the waiting time for injection may increase.
• If the waiting time for air-cleaning is too long, the waiting time for injection may increase.
EN - 12
Approach
Cleaning &
Injection position P1
Detect and
eliminate the
No
cause
OPTION
Air blast = 1
(Cable assembly)
OPTION
Air blast = 0
(Cable assembly)
OPTION
Air blast = 1
(Cable assembly)
Flow chart
Output
Y2 = 0
Input
Detect and
Ready = I
eliminate the
cause
Yes
Approach
OPTION
position P2
Air blast = 0
(Cable assembly)
Output
Y2 = 1
Output
Y1 = 1
Waiting time
approx. 2 sec.
Output
Y1 = 0
Output
Y4 = 1
Waiting time
approx. 2 sec. Ready = 1:
S1 = 0
S2 = 1
Output
Y4 = 0
BRS-LCi VW
Input
Ready = I
No
Yes
Move out of
maintenance station
Output
Y3 = 1
Waiting time
approx. 0.5 sec.
Output
Y3 = 0
Cleaning
process
finished