Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
1.
INTRODUCTION
Dear Customer, many thanks for your decision to buy the olive picking equipment Giulivo, manufactured
by our company. This equipment has been specifically designed to let olives, nuts, coffee beans drop into
a net, facilitating the collection of those and other types of fruits. As applicable to other products
manufactured by VOLPI, this machine has been strongly tested to assure the right quality and
performance. You can also count on a continuous after sales assistance provided by VOLPI maintenance
shops which have all the necessary spare parts.
2.
DESCRIPTION OF THE MANUAL
This instruction manual follows the requirements of the original Annex Nr.1 of the Machineries Directive
2006/42/CE of the European Community following additions and modifications. This manual has to be
considered part of the equipment and must be kept in a clean place for easy and continuons
consultation; it will follow the equipment from day one up to the nd until the final garbage disposal.
This instruction manual has the following objectives:
•
Describe the functioning and the correct utilisation of the machine.
•
Show the most important features of the machine.
•
Instruct the owner on how to use it.
•
Warn on possible hazard, and dangers.
•
Instruct on how to maintain and repair the machine.
•
Provide the list of spare parts available.
In addition to the specifications of this manual, all the existing safety laws and practices
have to be followed.
3.
ASSEMBLING
Codes 703-705L-XL- Ref. fig. B.1 - Code 706 Ref. fig. B.2
Hold the head of the machine -T- and position the head support -A- close to the standard pole as
indicated in this picture. Join the connector in the pole -M- with the connector on the head -B- pushing
up to the end to be sure to have electrical connection. Insert the pole in the head support after having
bent the cable as indicated in the drawing -W- and introduce it into the pole. Push straight the pole into
the head support and fix it by screwing the four nut -C- and insure a firm hold of the pole into the head
support.
4.
STARTING UP
Code 703 Ref. fig. C.1 – Codes 705L-XL Ref. fig. C.2
Before connecting the machine to the battery check the operating switch -N- in the OFF position.
Then proceed as follows:
•
Link the connector positioned at the bottom of the pole -D- to the connector -E- positioned at
the end of the extension cable -S- and screw it.
•
Insert the other connector -F- of the long cable into the socket -G- on the electronic box -B-.
•
Connect the electronic box -B- to the battery,12-24V, through the 2 nippers, the red one on the
positive (+) and the black one on the negative (-).
•
You can position the head at 3 different angles: 45° - 0° - 30°.
•
To lock the head in the selected position, rotate clockwise the 2 locking levers then pull up the
levers, rotate then counter clockwise positioning them against the bottom of the head.
Davide e Luigi Volpi S.p.A.
Via San Rocco, 10 – 46040 Casalromano /MN) – Italia
Tel. +39 0376 76009 Fax +39 0376 76408 www.volpioriginale.it
29
Tabla de contenido
