11. Starter handle
12. Fuel tank
13. Air filter cover
14. Cylinder cover
15. Spark plug cap and spark plug
16. Harness
17. Locking nut
18. Support cup
19. Support flange
20. Drive disc
21. Locking pin
22. Socket spanner
23. Transport guard
24. Operator's manual
25. Spanner
26. Allen key
27. 2-teeth blade
28. Muffler cover
29. Choke control
30. Clutch cover
31. Suspension ring
32. Air purge
Symbols on the product
WARNING! This product is dangerous.
Injury or death can occur to the operator or
bystanders if the product is not used
carefully and correctly. To prevent injury to
the operator or bystanders, read and obey
all safety instructions in the operator's
manual.
Please read the operator's manual carefully
and make sure that you understand the
instructions before use.
This product complies with applicable EC
Directives.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
1158 - 005 - 26.03.2020
The product can cause objects to eject,
which can cause injury.
Maximum speed of the output shaft.
Keep a minimum of 15 m (50 ft) distance to
persons and animals during operation of the
product.
Risk of blade thrust if the cutting equipment
touches an object that it does not
immediately cut. The product can cut off
body parts. Keep a minimum of 15 m (50 ft)
distance to persons and animals during
operation of the product.
Air purge bulb.
The direction to close the choke.
The direction to open the choke.
Noise emission to the environment refer to
the European Community's Directive. The
emission of the product is specified in the
Technical data chapter and on the label.
The rating plate shows the
serial number. yyyy is the
production year, ww is the
production week.
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
yyyywwxxxxx
3