Confirming The Completion Of The Installation; When Removing The Monitor (To Sony Dealers); Specifications - Sony BRAVIA FW-85BZ35F Guia Del Usuario

Confirming the completion of
the installation
Check the following points.
• The hooks of the Mounting Hook are firmly
latched in the holes of the Base Bracket.
• The cord and the cable are not twisted or
pinched.
• The two screws that secure the Mounting
Hook and the Base Bracket are securely
tightened.
WARNING
Do not adjust the angle of the Mounting Hook
when the Monitor is installed on the wall and be
sure to install completely. It may cause the
product to fall and result in injury or product
damage. Also, improper placement of the AC
power cord, etc., may cause fire or electric shock
through a short circuit.
Be sure to confirm the completion of the
installation for safety.
When removing the Monitor
(To Sony Dealers)
1
Unplug the AC power cord from the wall
outlet.
2
Remove the two screws which secure
the Monitor and the Base Bracket. (Refer
to 3 of Step 5 on page 14 for the screw
positions.)
3
Be sure to hold the Monitor and slide it
upward to remove the Monitor.
CAUTION
• Be careful not to allow the cord and cables to get
caught when removing the Monitor.
• Be careful not to hurt your hands or fingers when
removing the Monitor.
WARNING
• Two or more people (three or more people for
FW-85BZ35F) are needed to transport a large Monitor.

Specifications

Unit: (Approx.) [mm]
Weight: (Approx.) [kg]
4.7
525
Design and specifications are subject to change
without notice.
GB
60
73
450
15
GB