About The Machine / Technical Data; Electrical Connections; Intended Use And Foreseeable Misuse; Approved Cleaning Agents - IBS Scherer Typ A Manual De Instrucciones

1. ABOUT THE MACHINE / TECHNICAL DATA

Dimensions and performance data
External dimensions of the device:
Length:
Width:
Height:
Working area (internal dimensions):
Working height:
Weight without drum:
Weight with drum (full):
Carrying capacity:
Fill volume:
Noise emission level at the workstation:
Type class (in accordance with EN 12921-3):

Electrical connections

Power supply:
Frequency:
Power draw:
Max. backup fuse:
SAP pump data
Pump capacity:
Discharge head:
Motor input power:
Voltage:
Protection class:

2. INTENDED USE AND FORESEEABLE MISUSE

The IBS-Parts Cleaning Device Type A was designed to clean oil and grease-soiled metal parts with IBS-Special Cleaners and it is parti-
cularly suitable for cleaning axles on large vehicles due to its flat and mobile design.

2.1. Approved cleaning agents

The following halogen hydrocarbon-free cleaning agents may be used:
Type A device:
∙ IBS-Special Cleaner EL/Extra
∙ IBS-Special Cleaner RF
∙ IBS-Special Cleaner Purgasol
NOTE
When using cleaning agents from third-party manufacturers, always read and follow the product information and the EC Sa-
fety Data Sheet. Their use must be approved by IBS Scherer GmbH. Please also note the information given in section 2.2.
The 3-year extended warranty only applies when IBS-Special Cleaning Agents are used.
Type A
1000 mm
750 mm
356 mm
850 x 390 mm
150 mm
31 kg
66 kg
100 kg
35 l
< 70 dB (A)
A1
1/N/PE 230 V ~
50 Hz
0,8 A
6 A
Ca. 4 l/min.
1,0 m
45 W - 0,18 A
230 V
IP 54
IBS-BA_Typ_A-DE_CZ_PL_ES_EN_04.2020
EN
45