Tripp-Lite B320-4X1-HH-K1 Manual Del Propietário página 8

Installation
1. Make sure all equipment in the installation is powered off.
2. Connect the HDMI source to INPUT 1 on the presentation switch with a
user-supplied HDMI cable.
3. Repeat Step 2 for INPUT ports 2, 3 and 4.
4. Connect the RJ45 port on the presentation switch to the RJ45 port on
the remote receiver with a user-supplied Cat6 cable. Note: Maximum
transmission distance via Cat6 cabling for the B320-4X1-HH-K1 and
B320-4X1-HH-K2 is 50 ft. and 125 ft., respectively.
5. Connect the remote receiver's HDMI port to a display with a user-
supplied HDMI cable.
6. (Optional) If the B320-4X1-Series switch is not in line of sight, connect the
included IR receiver cable to the IR-IN port for more reliable IR reception.
7. (Optional) If you wish to control the B320-4X1-Series switch from your
computer, connect a user-supplied DB9 cable to the RS-232 port. See
RS-232 Commands for more information.
8. Turn on the power to all connected devices in the installation. Then,
connect the included external power supply to the switch transmitter unit.
9. The Power LED will illuminate green, indicating the unit is receiving
sufficient power, and Input LEDs will illuminate orange, indicating a
signal is being received from the sources.
20-05-025-933CA4.indb 8 20-05-025-933CA4.indb 8
8
10/21/2020 9:26:38 AM 10/21/2020 9:26:38 AM