Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Translation of
the original
notice
By tilting the adapter backwards, the rivet pins fall into the collecting bowl.
By leaning forward, the pins come out through the nozzle.
Pin collection:
To collect the pins, pull the lid off
the bowl.
Once the pins have been collec-
ted, put the lid back on until it
clicks.
Clamping jaws change:
Unscrew the nozzle with a span-
ner.
Replace the jaws 2 then,
position them in 3 to 120°.
Place 4 then 5 and then screw 1
with the keys (tighten well).
Self-piercing rivet extraction:
The kit can be fitted with a special nozzle for extracting self-piercing rivets by welding a pin to the rivet (ref. 066151).
Nozzle assembling:
Install the extraction nozzle 066151 on the nozzle holder.
Extraction stages:
1- Welding of the extraction pin:
Material: ARC PULL 350 062191 + ARC PULL RIVET BOX 064584
50KN BLIND RIVET ADAPTER FOR 10T RIVETER
1- Connection cone jaws M0042
2- Jaws (ref. 058446) 51522
3- M0043 jaw cone
Tightening
4- Spreader M0044
spanner
5- Spring 55189
1- Bowl M0077
2- Lid M0078
3- O-ring 55262
4- O-ring 551211
1
Set the stroke adjusting nut to 15mm
0
EN
2
3
1
4
5
4
2
3
15
Tabla de contenido
