Package Contents - PROZIS Chlea Manual Del Usuario

EN
User manual

PACKAGE CONTENTS

• 1 × Prozis Chlea - wireless speaker
• 1 × USB charging cable
• 1 × 3.5 mm audio cable
• 1 × User manual
Should you find any broken or missing pieces upon opening the package,
please contact us. We will replace them as soon as possible.
PRODUCT DESCRIPTION (SEE PAGE 2)
1. Built-in microphone
2. Operating mode indicator
• Blue = BT mode
• Pink = MicroSD card mode
• Green = Aux-in mode
• Red = Power off mode
3. PLAY/PAUSE button
• Press and hold to switch on/off
• Press once to PLAY/PAUSE the current playback
• Press twice to skip to the next track
• Press three times to skip to the previous track during BT/MicroSD
card/Aux in playback mode.
4. Touch Volume Controller
In BT mode
5. TWS/PAIR button
• Press to interrupt and start TWS connection.
• Press and hold this button for 3 seconds to interrupt the current BT
connection and initiate pairing.
6
6. MODE button
• Press to change between different modes when a MicroSD card or
3.5 mm Aux-in cable has been inserted.
7. MicroSD card slot
8. Aux-In Jack
9. Battery charging Indicator
• Red = Charging
• Green = Fully charged
10. DC 5V Charging jack
HOW TO USE
Switch the speaker on/off
Press and hold the PLAY/PAUSE button on top of the speaker. You will hear
the words "Power on". Meanwhile, the operating mode indicator light will
flash blue.
Press and hold the PLAY/PAUSE button again, and the words "Power off"
will confirm the speaker will switch off.
TWS connection
If you have two speakers, you can follow the below steps to establish a TWS
connection.
1. Press and hold the PLAY/PAUSE button to switch on both speakers.
2. Press the TWS button at the bottom of one speaker. You will hear the
words "TWS paired". Both speakers are now connected.
3. The TWS connection will be established again when the speaker is
switched off and switched on again.
4. If you want to interrupt the current TWS connection, you can press the
TWS button at the bottom of one speaker again. You will hear the words
"TWS disconnected" and the two speakers will be disconnected.
Note: If one speaker has been paired with a BT device, you will have to
press and hold the TWS/PAIR button to interrupt the current BT connection
and access TWS pairing.
EN
7