Changing The Pedals; Kickstand; Maintenance; Cleaning - Wayscral TAKEAWAY 100 Instrucciones De Uso Y Mantenimiento

7. Changing the pedals

To change the pedals, identify the pedals by the letter printed on the pedal. The right pedal has an "R"
printed on it and the left pedal has an "L" printed on it. Turn the R pedal clockwise to fix it on the crank arm.
Turn the L pedal anti-clockwise.

8. Kickstand

Before using the bicycle, make sure that the kickstand is definitely folded up.
II. MAINTENANCE
Your bicycle requires regular maintenance, not only for your safety but also to prolong its useful life. It is
important to periodically check the mechanical elements in order to replace worn-out components or
components showing signs of wear if necessary.
When replacing components, it is important to use original brand parts in order to preserve the bicycle's
performance and reliability. Make sure to use appropriate spare parts when it comes to the tyres, inner
tubes, gear system components and the various brake system components.

1. Cleaning

In order to avoid corrosion on the bicycle, it should be rinsed in fresh water after every use, especially if it
has been exposed to sea air.
It should be cleaned with a sponge, a bowl of warm soapy water and a hosepipe (without pressure). Be
particularly careful to not use a pressurised water jet. Clean the sides of the wheel rims and the brake pads
with alcohol or acetone.
2. Lubrification
Lubrification is essential for the various components that move, in order to avoid corrosion. Regularly grease
the chain, brush the sprockets and chainrings and trickle a few drops of lubricant into the brake and
derailleur cable sheaths.
We recommend starting by cleaning and drying the components to be greased. Specific lubricant is
recommended for the chain and derailleur. Grease can be used for the other components.
20