Hanging The Fan - Kichler Lyndon Manual De Instrucciones

HANGING THE FAN

REMEMBER to turn o the power before you begin installation. This is necessary
for your safety and also the proper programming of the control system.
To properly install your ceiling fan, follow the steps below.
Step 1 . Before attaching fan to outlet box (not included), ensure the outlet box is
securely fastened to at least two points to a structural ceiling member (a loose box
will cause the fan to wobble). Pass the 120 volt supply wires from the ceiling outlet
box through the center of the ceiling mounting bracket. Install mounting bracket to
outlet box in ceiling using the screws and washers included with the outlet box.
( Fig. 5)
Step 2. Remove one of the two shoulder screws in the mounting bracket and save it
for later use. Loosen the second shoulder screw without fully removing it. (Fig. 6)
Step 3. Remove the hanger ball from downrod assembly by loosening set screws ,
removing the cross pin, and twisting ball o the rod.( Fig. 7)
Outlet Box
Mounting
Bracket
Flat Washer
Screw
Fig. 5
Mounting Bracket
Shoulder Screw
Fig. 6
Hanger Ball
Set Screw
Cross Pin
Downrod
Fig. 7
52" Lyndon Patio LED TM
7