Installing The Wall Control - Kichler Lyndon Manual De Instrucciones

INSTALLING THE WALL CONTROL

Outlet Box
Switch
All wiring must be in accordance with the National Electrical Code and local electrical
codes. Electrical installation should be performed by a qualified licensed electrician.
Wall Plate
Select a location to install your wall control.You can replace an existing wall switch,
or install the wall control to a new outlet box.
Note: Make sure the electircal power is TURNED OFF at the main panel before continuing.
Note: SWITCH INSTALLATION MUST COMPLY WITH ALL LOCAL AND NATIONAL
ELECTRIC CODE.
Outlet Box
Wall Control
Step 1. Remove the existing wall plate and the old switch from the wall outlet box.
Wall Plate
Wire nut the BLACK leads (hot) together and push back inside the outlet box. (Fig. 25)
or select the desired location with a new wall outlet box.
Step 2. Use the screws provided to secure the wall control to the outlet box. (Fig. 26)
16