Kichler Lyndon Manual De Instrucciones página 11

ELECTRICAL CONNECTIONS (continued)
Step 1: Motor to receiver electrical connections:
Connect the BLACK wire from the fan to BLACK wire marked "TO MOTOR L" from the receiver.
Connect the WHITE wire from the fan to the WHITE wire marked "TO MOTOR N" from the receiver.
Connect the BLUE wire from the fan to the BLUE wire marked "FOR LIGHT" from the receiver.
Secure all the wire connections with the plastic wire connectors provided. (Fig.16)
Step 2: Remote receiver to outlet box electrical connections:
Connect the BLACK (hot)wire from the ceiling to the RED wire marked "AC in L"
from the receiver.
Connect the WHITE (neutral) wire from the ceiling to the WHITE wire marked "AC in N"
from the receiver.
Secure the wire connections with the plastic wire connectors provided. (Fig.16)
Step 3: Connect GROUND (GREEN) wires from hanger ball and mounting bracket,
to GROUND (GREEN or BARE COPPER) from house.Secure the wire connection
with a plastic connectors provided. After connecting the wires, spread them apart
so that the green and white wires are on one side of the outlet box and black
and blue wires are on the other side. (Fig.16)
NOTE: Carefully tuck the wire connections up into the outlet box.
NOTE: Fan must be installed at a maximum distance of 30 feet from the transmitting unit
for proper signal transmission between the transmitting unit and the fan's receiving unit.
Outlex box
White (Neutal)
Black (hot)
White ("AC IN N")
Red (AC IN L)
Receiver
Black ("TO MOTOR L") White ("TO MOTOR N")
Black (motor)
Blue (FOR LIGHT) Ground wire
White (Neutral)
Blue (for light)
Fig. 16
52" Lyndon Patio LED TM
Green or bare
copper (ground)
11