Operating Instructions - Kichler Lyndon Manual De Instrucciones

OPERATING INSTRUCTIONS:

Restore power to ceiling fan and test for proper operation. (Fig. 27)
Test the transmitter by pressing and releasing ANY button. A RED Light should
illuminate, if not, check to make sure the battery is inserted and seated correctly.
NOTE: To prevent damage to transmitter, remove the battery if not used for long
periods of time ( months ).
1. Fan Control:
To start the fan. Press the selected speed button to run the fan at the desired speed
and press the "OFF" button to turn o the fan.
HI-high speed
MED-medium speed
LOW-low speed
2. Light On/O -press and release light button.
3. Light Dimmer-continuous pressure on the light button dims light in a continuous
cycle from light to dark, or dark to light.
4. Fan Reverse - controls direction, forward or reverse.
Speed setting for warm or cool weather depend on factor such as th room size,
ceiling height, number of fans and so on.
Warm Weather Operation: Forward (counterclockwise) A downward airflow creates a
cooling e ect . This allows you set your air conditioner on a warmer setting without
a ecting your general comfort. (Fig. 28)
Cool Weather Operation: Reverse (clockwise) An upward airflow creates a warm air o
the ceiling areas. This allows you set your air conditioner on a cooler setting without
a ecting your general comfort. (Fig. 28)
Light Control Button
Speed Buttons
Motor O Button
52" Lyndon Patio LED TM
17