Kohler 22036-CP Instrucciones De Instalación página 8

4. Connect the Wires
Sensor Connector
Handle Switch
Connector
Handle Switch Wire
Apply grease.
Sensor Wire
Solenoid Wire
Apply grease (provided) to the sensor socket located on the circuit board inside
the cover. This will provide additional corrosion protection.
Connect the handle switch wire from the faucet to the handle switch connector on
the circuit board.
Connect the sensor wire from the faucet to the sensor connector on the circuit
board.
Connect the power cord to the power cord connector on the circuit board.
Connect the solenoid wire to the solenoid connector on the circuit board.
Plug the power supply into an unswitched 120 VAC outlet. The power LED on the
circuit board will illuminate.
Test activation of the sensor. Refer to the "Faucet Operation" section.
1384293-2-C
Power
LED
Circuit
Board
8
Power Cord
Connector
Cover
Solenoid
Connector
Power
Supply
Solenoid
Power
Cord
Kohler Co.