Error Code - NSK Ti-Max NLX nano Manual De Operación

CAUTION
It might happen if the O-Ring becomes depleted.
· Air/Water leak
· Air/Water does not came off
· Vibration
· Difficult to connect/disconnect the handpiece

9. Error Code

If the motor stops due to an abnormality such as a malfunction, overload, break or incorrect usage, it automatically checks
the state of the Control Box and detects the cause of the abnormality and displays an error code on the Indicator. If an error
code is displayed, turn on the power again and check whether the same error code is displayed. If the same error code is
displayed, take action by referring to the instructions provided in the "Check/Remedy" column in the following table.
Error
Trouble
Code
E0 Overcurrent error.
(In circuit)
E Overcurrent error.
(In software)
E2 Retry Error
E3 ITRIP Error
E5 Overvoltage Input Error
E6 LED voltage Error
E8 Overheat Error
E9 Motor Start Error
EA LED voltage Error
Eb Air Offset Error
Ec Air Full Scale Error
EE EEPROM Error
Cause
Detected overcurrent in the circuit.
Detected overcurrent in the software.
Motor stopped by the overload, and not
able to restart.
Faulty Motor or Internal circuit.
Overvoltage is given to the Control Box.
Overvoltage is given (more than 3.7V)
from the Internal circuit.
High temperature safe system is
functioning, due to long-time use at a high
load.
- Motor didn't reach the preset speed in a
prescribed period of time.
- Break down of a motor cord wire, or
internal circuit malfunction.
Voltage for the LED didin't reach the
preset speed in a prescribed period of
time.
Lower than preset " Lower limit of the air
pressure"
- Higher than preset "Upper limit of the air
pressure".
- Air pressure higher than 0.4MPa (4.0kgf/
cm ) is given.
2
Malfunction of the memory for the setting
values.
9
Check/Remedy
Contact your dealer.
Contact your dealer.
Contact your dealer.
Contact your dealer.
Contact your dealer.
Contact your dealer.
Cool it down for a while, and try again.
Contact your dealer.
Contact your dealer.
Displayed by Foot Air Calibration function.
Not a malfunction.
Displayed by Foot Air Calibration function.
Not a malfunction.
Contact your dealer.