Chapter 3. Signals And Errors; 3.1. Operator Intervention; Error With Operator Signal - Milnor 30022 Serie Guía Del Operario

3
Chapter
Signals and Errors
BICWCT04 (Published) Book specs- Dates: 20070507 / 20070507 / 20070507 Lang: ENG01 Applic: 42032F7W 42044WP2 42044WP3
48040F7W 60044WP2 60044WP3

3.1. Operator Intervention

Once a formula starts, the machine usually runs automatically. The machine will sound the signal
if an operator needs to make a decision or do something manually. The most common reasons
you'll need to attend to the machine are errors, and to manually add chemicals in some cases.

Error with Operator Signal

3.1.1.
The operator signal will sound and the beacon will flash if an error causes the machine to stop.
These errors usually disable the three-wire circuit, and include a tripped vibration switch or a
malfunction of the inverter that controls the motor.
appears on the display.
Figure 16: Typical Error with Operator Signal
Figure 16 shows how a vibration switch error
23

Chapter 3. Signals and Errors

PELLERIN MILNOR CORPORATION