SMA Solar Technology AG
2. Tighten both screws (TX10, torque: 0.8 to 1.2 Nm).
3. Insert the DC protective cover into the enclosure
opening. Push the DC protective cover downwards
into the enclosure. Ensure not to kink or damage the
cables.
4. Only with 15000TLEE / 20000TLEE: Tighten the
fastening screw (TX 20, torque: 2 Nm).
5. Plug the clamping brackets onto the DC protective
cover.
6. Recommission the inverter (see Section 8, page 23).
8
Recommissioning the Inverter
8.1
STP 15000TL / STP 20000TL / STP 25000TL
If you have disconnected the inverter from all voltage sources and want to recommission it, proceed
as follows.
Replacement Manual
8 Recommissioning the Inverter
2
STPTLEE-STPTL-10-BPDCLS-RM-xx-10
1
23