Installing The Mounting Plate Of The Dc Load-Break Switch - SMA Sunny Tripower 15000TL Instrucciones Para La Sustitución

7 Installing the Mounting Plate of the DC Load-Break Switch

5. Carefully remove the DC protective cover from the
enclosure. Push the DC protective cover upwards
and pull it slightly forward. Ensure not to kink or
damage the cables.
6. Unscrew both screws on the DC switching unit
(TX10).
7. Remove the mounting plate of the DC load-break
switch from the upper part of the DC protective
cover. Ensure that the eccentric mechanism is
attached to the upper part of the DC protective
cover.
7 Installing the Mounting Plate of the DC Load-Break
Switch
1. Plug the mounting plate of the DC load-break switch
onto the upper part of the DC protective cover.
Ensure that the eccentric mechanism is attached to
the upper part of the DC protective cover.
22 STPTLEE-STPTL-10-BPDCLS-RM-xx-10
SMA Solar Technology AG
1
2
Replacement Manual