Recalling Measurements In Memory - HealthSmart 04-630-001 Manual De Instrucciones

RECALLING MEASUREMENTS IN MEMORY

You can recall up to 120 total measurements in memory (60 per memory
bank). These measurements can be shared with your physician or trained
healthcare professional.
1. Press and release the MEMORY button. The unit will display either U1 or
U2 depending upon the user bank selected. It will also show how many
measurements are stored within that bank.
2. To select the appropriate user bank press the POWER button to switch
between U1 and U2.
3. Once the desired user memory bank is selected, press the MEMORY
button again to scroll through the saved measurements, Fig 1. After
you've scrolled through all the readings, the unit will automatically turn off.
NOTE: Each memory bank can store up to 60 readings. When the
number of readings exceeds 60, the oldest data will be replaced
with the new record.
To erase all stored measurements:
1. Press and release the MEMORY button. The unit will display either U1 or U2 depending
upon the user bank selected and how many measurements are stored within that bank.
2. Select the desired user bank by pressing and releasing the MEMORY button.
3. Press and hold down the MEMORY button until two horizontal lines flash, Fig 2. This
indicates that all measurements within the selected memory bank have been erased.
14
Fig. 1
Fig. 2