Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Recalling Measurements in Memory
You can recall up to 120 total measurements in memory (60 per
memory bank). These measurements can be shared with your
physician or trained healthcare professional.
1. Press and release the MEMORY button. The unit will display
either U1 or U2 depending upon the user bank selected. It will
also show how many measurements are stored within that
bank, Fig. 1.
2. To select the appropriate user bank press the POWER button
to switch between U1 and U2.
3. Once the desired user memory bank is selected, press the
MEMORY button again to scroll through the saved
measurements. After you've scrolled through all the readings,
the unit will automatically turn off.
NOTE: Each memory bank can store up to 60 readings. When the
number of readings exceeds 60, the oldest data will be replaced
with the new record.
To erase all stored measurements:
1. Press and release the MEMORY button. The unit will display
either U1 or U2 depending upon the user bank selected and
how many measurements are stored within that bank.
2. Select the desired user bank by pressing and releasing the
MEMORY button.
3. Press and hold down the Memory button until two horizontal
lines flash. This indicates that all measurements within the
selected memory bank have been erased.
Fig. 1
Fig. 2
16
Description of Display Symbols
SYS
Indicates a measurement within Stage 3
Hypertension.
DIA
SYS
Indicates a measurement within Stage 2
Hypertension.
DIA
SYS
Indicates a measurement within Stage 1
Hypertension.
DIA
Appears when batteries should be replaced.
-- Description of Display Symbols Continued
17
Capítulos
Tabla de contenido
