Recalling Measurements In Memory; Description Of Symbols - HealthSmart 04–825–001 Manual De Instrucciones

recalling measurements in memory

You can recall up to 60 measurements in the memory. These
measurements can be shared with your physician or trained
healthcare professional.
1. Press and release the MEMORY button. It will show how
many measurements are stored within the memory bank,
followed by the last result, Fig. 1.
2. Press the MEMORY button again to scroll through the
saved measurements. After you've scrolled through all the
readings, the unit will automatically turn off.
NOTE: When the number of readings exceeds 60, the oldest
data will be replaced with the new record.
To erase all stored measurements:
1. Press and release the MEMORY button. The unit will display how many
measurements are stored within the memory bank.
2. Press and hold down the MEMORY button until two horizontal
lines flash. This indicates that all measurements within the
memory bank have been erased, Fig. 2.
04-825-001 IM_13Feb2015.indd 18-19
Fig. 1
Fig. 2
18
DescriPtion of DisPlay symBols
SYS
Indicates a measurement within
Stage 3 Hypertension.
DIA
SYS
Indicates a measurement within
Stage 2 Hypertension.
DIA
SYS
Indicates a measurement within
Stage 1 Hypertension.
DIA
Appears when batteries should be replaced.
19
2/13/15 5:18 PM