Tabla de contenido
Idiomas disponibles
Idiomas disponibles
trouBleshooting
If any abnormality occurs during use, please check and correct the following:
Condition
Display is blank when power is on
Measurement incomplete or abnormally
low or high values displayed
Measurements are different from those
typically measured by physician or
every measurement reading is different.
EE Symbol Displays
04-825-001 IM_13Feb2015.indd 22-23
Correction
Check and correct the polarity of the
installed batteries. Reinstall or replace
batteries.
Review and follow "Applying your Blood
Pressure Cuff" and "Taking Your Blood
Pressure Reading" sections. Replace
the batteries.
Remember, blood pressure readings
are influenced by physical and mental
conditions and/or even the time of day.
Daily measurement recordings should
be interpreted by your physician.
Do not talk or move during the
measurement. Review "Applying Your
Blood Pressure Cuff" section.
22
care anD maintenance
1.
Use only a soft, dry cloth to clean your blood pressure monitor.
2.
Avoid using any types of liquids on the monitor or cuff.
3.
Store your monitor in the provided storage case when not in use.
4.
Do not store the unit where it will be exposed to direct sunlight, dust or humidity.
Avoid extreme temperatures.
5.
Never disassemble the monitor or cuff.
6.
Dropping or subjecting your blood pressure monitor to strong shocks should
be avoided.
7.
Remove batteries prior to storing.
8.
It is recommended to disinfect the cuff twice a week if needed (for example, in
hospital or in clinic). Wipe the inner side (the side that contacts skin) of the cuff
with a soft cloth squeezed after moistened with Ethyl alcohol (75-90%), then
dry the cuff by airing.
9.
No component of the monitor should be serviced by the user. The circuit diagrams,
component part lists, descriptions, calibration instructions, or other information will
assist the user's appropriately qualified technical personnel in repair. Those parts of
equipment that are designated repairable, can be supplied.
10. It is recommended for the performance to be checked every 2 years.
11. Please keep the cuff clean. If the cuff becomes dirty, remove it from the monitor
and clear it by hand in a mild detergent, then rinse it thoroughly in cold water. Never
dry the cuff in clothes dryer or iron it. Cleaning the cuff after the usage of every 200
times is recommended.
12. The monitor can maintain the safety and performance characteristics for a minimum
of 10,000 measurements or 5 years.
13. The cuff's integrity is maintained after 1,000 open–close cycles of the closure.
23
2/13/15 5:18 PM
Capítulos
Tabla de contenido
