Wirefeeder Front Panel Functions; Others Functions (Wirefeeder Or Power Source) - Oerlikon WIREFEEDER WF4 Manual Del Usuario

EN

3.3 WIREFEEDER FRONT PANEL FUNCTIONS

3.4 OTHERS FUNCTIONS (WIREFEEDER OR POWER SOURCE)

Symbol
12
Name of function
Arc length adjustment in
ESP mode
Wirespeed adjustment in
Manual mode
Gas purge/manual wire
feed
1. Left display: voltage, Right display: wire thickness/wire speed/
current
2. Selector of display wire thickness/wire speed/current
3. Test purge gas (short push)/test wirefeeding (long push)
4. Arc length adjustment (in ESP mode)/wire speed adjustment (in
Manual mode)
Description
Adjustment of the arc length by applying a delta
from –30 % to +30 % of the selected wire of ESP
speed point.
Adjustment of the wirespeed value when power
source is set in manual mode.
A short push activates a gas bleed for 5 seconds
and long push activates wirefeeding while button
is pushed.
WARNING
To have access to the button arc length adjustment,
the parameter "Arc length setting mode" has to be
set on value "rc".
Adjustment values
Min
–30 %
1 m/min
—
Max
+30 %
20 m/min
—