Organization - Cisco Systems Power System 2300 Guía De Instalación De Hardware

Organization

Organization
Cisco Redundant Power System 2300 Hardware Installation Guide
xii
For information about configuring the RPS 2300, see the switch software
configuration guide, the switch command reference, and the switch system
message guide on the Cisco.com Technical Support and the Documentation home
page.
For information about the standard Cisco IOS Release 12.1 or 12.2 commands,
see the Cisco IOS documentation set from the Cisco.com home page at Technical
Support and Documentation > Documentation. From the Cisco Documentation
home page, select Release 12.1 or 12.2 from the Cisco IOS Software drop-down
list.
This guide is organized into the following chapters:
Chapter 1, "Product Overview,"
•
2300.
Chapter 2, "RPS 2300 Installation,"
•
a rack, table, or shelf, and how to connect the cables and the power supply
modules to it.
Chapter 3, "Power Supply and Fan Module
•
install or remove a new or replacement power supply module or fan module
and how to connect or disconnect the cables.
Chapter 4, "Troubleshooting,"
•
problems that might occur when installing the RPS 2300.
Appendix A, "Technical Specifications,"
•
environmental specifications, the power supply specifications, and the
regulatory agency approvals.
Appendix B, "Connector and Cable Specifications,"
•
cable specifications and pinout information.
Appendix C, "Translated Warnings,"
•
languages for the safety warnings in this guide.
presents a functional overview of the RPS
describes how to install the RPS 2300 on
Installation,"describes how to
describes how to identify and resolve
lists the RPS 2300 physical and
describes the RPS 2300
contains translations in various
Preface
78-17647-02