Hilti DGH 130 Manual De Instrucciones página 19

3.2 Overview 1
3.3 Items supplied
Grinder, operating instructions, Keyless quick-release lock nut and flange.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your local
Hilti Store or online at: www.hilti.group | USA: www.hilti.com
3.4 Starting current limitation
The electronic starting current limiter reduces the starting current drawn by the power tool and thus prevents
the mains fuse blowing. It also allows the power tool to start smoothly, without a jolt.
3.5 Constant-speed electronics
Electronic speed control keeps running speed almost constant irrespective of whether the power tool is
idling or running under load. Constant running speed helps ensure maximum efficiency.
3.6 Active Torque Control (ATC)
The electronics detect potential stalling of the disc and prevent further rotation of the arbor by switching off
the tool.
If the ATC system has been triggered, restart the tool. Do this by releasing the on/off switch and then
pressing it again.
If the ATC system malfunctions, the power tool will run only at greatly reduced speed and with greatly
reduced torque. Have the tool checked by Hilti Service.
3.7 Restart interlock
The power tool does not restart by itself when the on/off switch is locked in the on-position and the power
returns after an interruption in the electric supply. The on/off switch must first be released and then pressed
again to restart.
*2204296*
Printed: 23.07.2019 | Doc-Nr: PUB / 5504888 / 000 / 00
@
;
=
%
&
(
)
+
§
/
:
∙
$
2204296
Connector for dust extraction
Spindle lock button
On/off switch
Guard
Adjusting lever for segment opening
Height adjustment of the guard
Keyless quick-release lock nut
Diamond cup wheel
Mounting flange
Arbor
Grinding pad for precision grinding
Mounting flange for grinding pad
Adjusting knob for speed
English 17