Siemens ER926SB70E Instrucciones De Funcionamiento página 13

Cleaning and maintenance
Cleaning
Unsuitable products
12
All manuals and user guides at all-guides.com
Once the appliance is cool, use a sponge to clean i t with
soap and water.
After each use, clean the surface of the respective burner
parts once they have cooled down. If any bits are le f t
(overcooked food, drops of grease etc.), however few,
they will become stuck to the surface and more diff icult
to remove later. The holes and grooves must be clean for
the flame to ignite properly.
The movement of some pans may leave metal residue on
the pan supports.
Clean the burners and pan supports using soapy water
and scrub with a non-wire brush.
Alternatively, the pan supports can be put in the
dishwasher. Use the dishwasher manufacturer's
recommended detergent. If the pan supports are very
dirty, they should be cleaned previously.
Do not put the burner caps in the dishwasher.
If the pan supports are fitted with rubber rests, en sure that
these are also cleaned. The rests may come loose an d
the pan support may scratch the hob.
Always dry the burners and pan supports completely.
Water droplets or damp patches on the hob at the st art
of cooking may damage the enamel.
After cleaning and drying the burners, make sure th e
burner covers are correctly placed on the burner fl ame
diffuser.
Never slide pans across the glass surface, as you m ay
scratch it. In addition, try not to drop heavy or sh
objects on the glass. Never strike any part of the hob.
Do not use steam cleaners. This could damage the hob.
Never use abrasive products, steel scourers, sharp
implements, knives, etc. to remove bits of hardened food
from the hob.
If your hob is fitted with a glass or aluminium pane l, never
use a knife, scraper or similar to clean the point where it
joins the metal.
Do not use knives, scrapers or similar implements t o
clean the point where the glass meets the burner tri ms,
the metal frames or the glass/aluminium panels, if fitted.
arp