Installation Of Safety Support - Kichler SOLA Manual De Instrucciones

INSTALLATION OF SAFETY SUPPORT

(Required for Canadian installation ONLY)
A safety support cable is provided to help prevent the ceiling fan from falling.
Please install it as follows:
Step 1. Drive a wood screw and washers into the side of the brace that holds
the outlet box. Leave 3mm (1/8") of space between the support brace and the
washer (Fig. 7).
Step 2. Insert the safety cable through the mounting bracket and one of the
holes in the outlet box into the ceiling. Adjust the length of the safety cable to
reach the screw and washers by pulling the extra cable through the cable clamp
until the overall length is correct. Put the end of the cable back through the cable
clamp, forming a loop at the end of the cable. Tighten the cable clamp securely.
Now, put the loop in the end of the safety cable over the wood screw and under
the washer. Tighten the wood screw securely (Fig. 8)
NOTE: Although the safety support cable is required for Canadian installations
only, it's a good idea to make the attachment with any installation.
8 | KICHLER.COM
Flat washer
Wood screw
Support brace
Spring washer
Ceiling
Outlet box
Fig. 7
Safety cable
Bolt
Fig. 8
Wood screw