Kichler SOLA Manual De Instrucciones página 10

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ELECTRIC CONNECTIONS
Step 1. Motor to Receiver Electrical Connections: Connect the black wire
from the fan to the black wire marked "TO MOTOR L" on the receiver.
Connect the white wire from the fan to the white wire marked "TO MOTOR N"
on the receiver. Connect the blue wire from the fan to the blue wire marked
"FOR LIGHT" on the receiver. Secure all the wire connections with the plastic
wire nuts provided (Fig. 10).
Step 2. Receiver to House Supply Wires Electrical Connections: Connect the
black (hot) wire from the ceiling to the black wire marked "AC in L" from the
receiver. Connect the white(neutral) wire from the ceiling to the white wire
marked "AC in N" from the Receiver. Secure the wire connections with the
plastic wire nuts provided (Fig. 10).
Step 3. If your outlet box has a ground wire (green or bare copper) connect it
to the fan ground wires: Secure the wire connection with a plastic nut
provided. Place the receiver into the motor housing. After connecting the
wires, spread them apart so that the green and white wires are on one side of
the outlet box and black and blue wires are on the other side (Fig. 10).
NOTE: Carefully tuck the wire connections up into the outlet box.
NOTE: Fan must be installed at a maximum distance of 30 feet from the
remote transmitter for optimal signal transmission between the transmitter
and the fan's receiving unit.
10
|
KICHLER.COM
(CONTINUED)
Ground wire
Green wire
Blue (FOR LIGHT)
White (TO MOTOR N)
Black (TO MOTOR L)
Fig. 10
Outlet box
White (Neutral)
Black (Hot)
White (AC IN N)
Black (AC IN L)
Tabla de contenido
loading

Tabla de contenido