Kichler SOLA Manual De Instrucciones página 14

FINISHING THE INSTALLATION
(CONTINUED)
Step 7. For use with light kit: Connect the 2 single-pin connectors from the switch
housing to the 2 single-pin connectors from the LED assembly. Assemble the
LED assembly to the switch housing using the two key slots. Replace the third
screw removed in step 4 and securely tighten all three screws (Fig. 16a)
Switch housing
Step 8. Secure the glass shade to switch housing by twisting in a clockwise
LED assembly
direction. Do not over-tighten (Fig. 16b).
Screw
Fig. 16a
Glass shade
Fig. 16b
14 | KICHLER.COM