Kichler SOLA Manual De Instrucciones página 12

FINISHING THE INSTALLATION
(CONTINUED)
Step 3. Remove one of the three screws in the adapter plate at the bottom of the
motor assembly and retain the screw for later use. Slightly loosen the remaining
two screws. Place the motor connector through the center hole of the switch
housing. Engage the switch housing 9-pin connector with the motor connector. The
Adapter plate
two connectors have keyholes that must be mated correctly before they can be
engaged. Rotate the switch housing key hole slots clockwise to engage both
loosened screws. Reinstall the previous removed screw. Secure the switch housing
to the adapter plate by tightening the three screws (Fig. 13).
Switch housing
Step 4. Remove one of the three screws in the switch housing. Slightly loosen the
Fig. 13
remaining two screws (Fig. 14).
Switch housing
Screw
Fig. 14
12 | KICHLER.COM