Finishing The Installation - Kichler SOLA Manual De Instrucciones

FINISHING THE INSTALLATION

Step 1. Remove the 3 small screws from the motor assembly for later use. Lift up
the motor housing on to the ceiling mounting plate/bracket, aligning the 3 holes
from both parts. Secure the motor housing to the motor bracket by using the 3
small screws removed previously (Fig. 11).
Step 2. Insert the blade through the slots on the flywheel and attach to the motor
hub using the blade screws and blade trim. Make sure the screws securing the
blades to the motor hub are tightened and are properly seated (Fig. 12).
Ceiling mounting
plate / bracket
Motor assembly
Fig. 11
Blade
Blade trim
Blade screw
Fig. 12
Screw
Flywheel
Motor hub
SOLA | 11