DeWalt DW08802 Manual De Instrucciones página 7

Contents
• Laser Information
• User Safety
• Battery Safety
• Powering the Laser
• Turning the Laser On
• Checking Laser Accuracy
• Using the Laser
• Maintenance
• Troubleshooting
• Service and Repairs
• Specifications
Laser Information
The DW08802 and DW08802CG Cubix lasers are Class 2
laser products. The lasers are self-leveling laser tools that can
be used for horizontal (level) and vertical (plumb) alignment
projects.
User Safety
Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
If you have any questions or comments about this or any
D WALT tool, go to http://www.D
®
E
The label on your laser may include the following symbols.
Warning Labels
For your convenience and safety, the following labels are
on your laser.
TYPE 1
3V DC
WALT.com.
E
• Do not operate the laser in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. This tool may create sparks which may ignite the
dust or fumes.
WARNING:
Read and understand all instructions. Failure to
follow the warnings and instructions in this manual
may result in serious personal injury.
SAVE THESE INSTRUCTIONS
WARNING:
Laser Radiation Exposure. Do not disassemble
or modify the laser level. There are no user
serviceable parts inside. Serious eye injury could
result.
WARNING:
Hazardous Radiation. Use of controls or
adjustments, or performance of procedures, other
than those specified herein may result in hazardous
radiation exposure.
Symbol Meaning
V Volts
mW Milliwatts
Laser Warning
nm Wavelength in nanometers
2 Class 2 Laser
WARNING: To reduce the risk of injury, user
must read instruction manual.
WARNING: LASER RADIATION. DO NOT
STARE INTO BEAM. Class 2 Laser Product.
DW08802
MADE IN CHINA
LASER
2
≤1.5mW @630-680nm
IEC 60825-1: 2014
Complies with 21 CFR 1040,10 and 1040,11
except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007
www. D WALT.com
E
DW08802CG
MADE IN CHINA
LASER
2
≤1.5mW @510-530nm
IEC 60825-1: 2014
Complies with 21 CFR 1040,10 and 1040,11
except for deviations pursuant to Laser
TYPE 1
Notice No. 50, dated June 24, 2007
3V DC
www. D WALT.com
E
E
7