AVM FRITZ!Powerline 1260E Instalación Y Operación página 7

Expanding the Wireless Network with FRITZ!Powerline
Here is how to use FRITZ!Powerline 1260E as a WLAN repeater.
1. In the web browser, enter the address http://fritz.powerline. The FRITZ!Powerline
1260E user interface opens.
2. Select Access to the Home Network and click Change Connection Type.
3. Select Wireless Bridge and click Next. A Wizard takes you step by step through the
confi guration of FRITZ!Powerline 1260E.
4. At the end of confi guration, click Finish.
5. Select Powerline, disable the Powerline active checkbox, and click OK.
6. Connect your wireless LAN and network devices with FRITZ!Powerline 1260E.
WiFi
12
WiFi
LEDs and Buttons
Condition Meaning
on Wireless LAN enabled
WLAN
off Wireless LAN disabled (in the user interface)
in "Wireless Bridge" mode: Searching for the access
fl ashing
point
Powerline on Connected with the powerline network
No connection with the powerline network, or power-
off
line switched off (in the user interface)

Flashing

along with
Connect
"WLAN" and
Powerline


Integrating FRITZ!Powerline into the network /
Triggering WPS / Enabling Mesh WiFi
Loading factory settings
FRITZ!Powerline is being integrated into the
FRITZ!Box's Mesh WiFi
Receiving or transmitting the password of the
powerline network
Performing WPS (Wi-Fi Protected Setup)
Restart
Press Connect for
1 second
longer than 15 seconds
13