Tabla de contenido
Idiomas disponibles
Idiomas disponibles
For procedures requiring open area plume removal (i.e., external lesions)
Assemble the sterile, disposable evacuation tubing (Catalog number 6084)
directly into the top of the pre-filter. Position the opposite end over the site
to be treated.
Plug the unit into an appropriate wall outlet. (See the Specifications section)
Push the POWER switch to the "On" position to start the unit and adjust the
suction control knob to the desired level.
At the completion of each procedure activate the system to insure safe
particle containment. Using gloves and a mask, remove the pre-filter,
the reducer and the used section of suction tubing and discard into an
infectious waste receptacle. (See Cautions) The Smoke Evacuation
System 6080A-50 should be stored with a new pre-filter and reducer in
place on the ULPA filter.
NOTE:
Maintenance Procedures
No maintenance is required during normal operation other than making
sure that ample space is maintained around the unit to allow for free air
flow and adequate cooling.
Cleaning Procedures
The outside of the unit may be cleaned as necessary with a soft cloth
dampened (not wet) with isopropyl alcohol. Do not allow liquid to get inside
of the unit.
Specifications
Electrical:
Size (W x D x H): 9 inches x 9 inches x 21 inches
Weight:
Air Flow:
Filter:
The expected life of the ULPA filter is 3-6 months
depending on usage. It must be discarded into
an infectious waste receptacle if plume odor is
detected or the suction is diminished.
220VAC, 50 Hz
(22.86 cm x 22.86 cm x 53.34 cm)
21 pounds (9.53 Kg)
35 CFM minimum at maximum setting
Pre-filter, charcoal filter for odor removal and
hydrophobic ULPA filter rated at 99.999% efficiency
level for 0.014 micron particles (based on Standard
CNC Evaluations)
3
Tabla de contenido
