Ulpa Filter Installation - CooperSurgical 6080A-50 Manual De Funcionamiento

ULPA Filter Installation

Insert the large ULPA Filter cylinder with the
air-flow arrow pointing down. (See Photo A).
Photo A
Operating Instructions
Prepare the unit for use by inserting a
clean, disposable pre-filter onto the ULPA
Filter cylinder. (See Photo B). Be sure this
device is firmly seated.
Photo B
For procedures requiring close proximity plume removal (i.e., vaginal
speculum)
Assemble the ⅜ inch reducer (Catalog number
6083) onto the port on the disposable pre-filter
top with a slight twisting motion. Attach one end
of an appropriate length of ⅜ inch ID evacuation
tubing (Catalog number 6084) to the reducer
connector and direct the other end to the patient
and any appropriate device being used, such
as a vaginal speculum equipped with a smoke
evacuation adapter. (See Photo C).
Photo C
2